Changing the Default Caption Type
Use the following procedure to select the default caption type. The caption type you set
here will be used by default for subsequent prints—although you are free to make one-
time changes as described on page 97. This default setting is stored in the camera's
nonvolatile memory and is not lost at power-off.
Caption selection screen
1
OFF
DATE
TIME
FILENAME
BACK
NEXT
Print menu
2
[
TIME
]
END
CHANGE
Including the Date, Time, or Filename on the Print (continued)
1
Open the Print menu, select
select the desired caption type.
2
Press the OK button.
• The previous menu screen reappears, and
the new setting is shown in the brackets.
1
3
Press the OK button again.
• The camera registers the setting, and the
menu disappears.
2 3
To cancel the printout...
You can cancel at Step 2 by pressing the MENU
button (
return you to the preceding screen.
) rather than the OK button. This will
, and then
5
99