Table of Contents
Advertisement
Chapter 9 Processing Images at Your Computer
Transferring Image Data to a
Computer
One way to transfer data is to take the card out of the camera and set it into a special
adapter that loads directly into your computer, or into a USB SmartMedia
Reader/Writer that is connected to your computer. Another way is to connect the
camera to the computer by cable, then make the transfer using the included CAMEDIA
Master software.
If you wish to view your movies on your computer screen, you should also have
QuickTime installed on your computer. QuickTime is automatically installed together
with CAMEDIA Master.
Using a SmartMedia/PC Card Adapter
If your computer includes a PC-card slot or an external PC-card drive, you can make
the transfer using a separately sold SmartMedia/PC-Card adapter. The adapter allows
you to load the SmartMedia card into the PC-card slot. For instructions, refer to the
documentation included with the adapter.
Using a SmartMedia/Floppy Adapter
If your computer includes a 3.5" floppy drive, you can make the transfer using a
separately sold SmartMedia/floppy adapter. This adapter allows you to load the
SmartMedia card right into the floppy drive. For instructions, refer to the documentation
included with the adapter.
182
Hide quick links:
Advertisement
Table of Contents
