Switching On And Off - Olympus CAMEDIA C-2040 Zoom Instructions Manual

Switching on and off

By turning the Mode dial to any setting other than "OFF", the camera is
switched on. Be sure to remove the lens cap.
1
Press in on each side of
2
the lens cap as shown in
the figure and remove the
lens cap.
2
Set the Mode dial to "P".
The camera switches on.
Setting the Mode dial to
"A/S/M", "P", or "
camera to a shooting mode.
The lens extends out from the
camera body and the remain-
ing battery charge and num-
ber
appear on the control panel.
When you set the Mode dial to
"
on in playback mode and the
monitor lights up.
3
When you have finished
using the camera, set the
Mode dial to "OFF".
The camera switches off.
The lens retracts into the cam-
era body and the monitor and
control panel switches off.
Always replace the lens cap
when the camera is not in
use.
52
" sets the
of storable pictures
" , the camera switches
P
2
1
3
OFF