Olympus CAMEDIA C-2040 Zoom Instructions Manual page 204

Troubleshooting
Problem:
I cannot display images on the monitor.
Cause
qThe camera is set to a shooting
mode.
wThere are no pictures recorded on
the card.
eThere is a fault in the card.
rThe camera is connected to a TV.
Problem:
The monitor is difficult to see.
Cause
qThe monitor brightness is incor-
rectly adjusted.
wYou are looking at the monitor in
sunlight.
1 0
Problem:
I cannot protect images, erase frames (single or all), or initialize the
SmartMedia card.
Cause
qThere is a write-protect sticker on
the card.
204
Solution
qSet the Mode dial to "
wThe
"NO PICTURE"
appears on the monitor. Take a pic-
ture and then display the shot.
eRefer to the Error Code chart.
rThe monitor is switched off while the
camera is connected to a TV.
Solution
qAdjust the monitor brightness.
wUse your hand or another object to
shade the monitor.
Solution
qPeel the sticker off before using the
card. Do not re-use write-protect
stickers.
See
P.138
".
P.60
message
P.210
P.143
See
P.191
See
P.35