Selecting The Color Tone (Preset White Balance) - Olympus CAMEDIA C-2040 Zoom Instructions Manual

Selecting the color tone (Preset White Balance)

When the camera's automatic settings do not give the desired result due to
the type of light source, you can get better results by selecting a preset white
balance setting.
P A/S/M
1
Press the
The menu screen appears.
2
Use or
Arrow pad to select "WB"
and then press
3
Press or
"PRE-SET" and then press
.
To take pictures using the
AUTO setting, select "AUTO"
at this point and press the
[OK] button.
4
Press or
the desired setting (see
below) and then press the
[OK] button.
The available settings are as
follows:
" " : Daylight
" " : Overcast
" " : Tungsten light
" " : Fluorescent
"WB" appears on the control
panel.
You can still take pictures at
this point.
(Menu) button.
on the
.
to select
to select
2 3 4
4
1
P F2.0 1/800 0.0
AF/MF
DRIVE
AUTO
WB
PRE-SET
ISO
[ 1 / 3 ]
(This screen shows the still
picture shooting menu.)
Control panel
Manual white balance indicator
P
4
105