Mechanical / Electrical Specifications Volta 500; Unpacking, Handling And Storage Volta 500; Precautions - Stage Zero Volta 500 User Manual

Hide thumbs Also See for Volta 500:
Table of Contents

Advertisement

4 Mechanical / Electrical Specifications Volta 500

The electrical and mechanical characteristics of Stage Zero equipment can be found on www.stagezero.co.za. Main
electrical characteristics of equipment are also stated on each unit label. Please refer to the datasheet or the product
nameplate for the maximum system voltage.
Model : Volta 500
Input : 220-230 VAC 50Hz
Output : 220-240 VAC
Output Power : 500W (MAX)
Battery Capacity : 2.4 kWh
Fuse : 5A
Weight : 15.kg
Dimensions : 36cm (H) x 36cm (L) x 16cm (W)

5 Unpacking, Handling and Storage Volta 500

5.1 Precautions

Volta 500 unit should be stored in a dry and ventilated environment to avoid direct sunlight and moisture.
Unpack Volta 500-unit boxes carefully. Unpack, transport and store the Volta 500 unit with care.
During transportation, please make sure there is no strenuous vibration on the Volta 500 unit.
Do not paint or apply any other adhesive on the Volta 500 unit.
Do not repair problematic units on your own. If the Volta 500 unit is faulty, please call the help line for
assistance.
Volta 500 units are to be placed on a rigid surface with sufficient space for the unit.
Do not drill holes into the Volta 500 unit. This will void the warranty.
Do not use Volta 500 units in damp or wet locations.
Do not use Volta 500 units outdoors.
Store idle Volta 500 units indoors. When not in use, units should be stored indoors in a dry place – out of
reach of children.
Do not overload the Volta 500 unit. It will do the job better and with less likelihood of a risk of injury at the
rate for which it was designed.
VOLTA 500
7

Advertisement

Table of Contents
loading

Table of Contents