.............................. 4 ATTERY AFETY ................................ 4 ENERAL AFETY VIEWS OF THE VOLTA 500 UNIT ............................ 5 MECHANICAL / ELECTRICAL SPECIFICATIONS VOLTA 500 .................... 7 UNPACKING, HANDLING AND STORAGE VOLTA 500 ....................7 ................................7 RECAUTIONS EQUIPMENT FEATURES VOLTA 500 ..........................8 500 U ..........................
Congratulations Volta 500 Congratulations on your new Stage Zero Volta 500 Unit. We are sure that you will be very satisfied with this product as we pride ourselves on providing quality products. This product is proudly manufactured in South Africa.
Do not use or install damaged Volta 500 units. Only the fuse may be replaced on this Volta 500 unit, Do not attempt to repair any other part of the Volta 500 unit. Do not disassemble a Volta 500 unit or remove any Volta 500 unit’s parts.
Store idle Volta 500 units indoors. When not in use, units should be stored indoors in a dry place – out of reach of children. Do not overload the Volta 500 unit. It will do the job better and with less likelihood of a risk of injury at the rate for which it was designed.
AC (alternating current) household power. The battery is charged when it is plugged into the mains supply. Plug items into the Volta 500 unit that you need to be powered, keeping in mind the unit’s capacity of 500W. The Volta 500 unit is not suitable for use with appliances with electric motors such as fridges, washing machines, air conditioners etc.
The Volta 500 units batteries should take 4 hours to fully charge from the point where they were completely discharged. The Volta 500 unit will make a buzzing sound if it is being overloaded, this may result in the unit tripping. If the unit trips, unplug the appliances from the Volta 500 unit and reset the Volta 500 by unplugging it from the mains electrical supply.