Page 1
Volta 500 Portable Power Station User Manual Please read this manual before use and follow the instructions inside. Keep this manual for future reference.
This Manual contains important instructions that should be followed during operation of the Stage Zero Volta 500 Unit. The information contained in this manual is subject to change by Stage Zero (Pty) Ltd (hereinafter referred to as Stage Zero) without prior notice.
If the Device (or any part thereof) has any indication of a liquid like substance leaking from it, avoid contact with the substance and contact Stage Zero immediately. If one is exposed to the leaked substance, immediately perform the actions described below: •...
2. Product Information 2.1 General The Volta 500 is an uninterrupted portable power station that can be used to power selected appliances/devices when the main electricity power fails (i.e., during load shedding). The changeover from grid to ‘back-up’ power occurs automatically and once the device is connected to the selected loads requires no input from the user.
2.2 Specifications Product Type UPS Backup Power Capacity 1152Wh @ 90% DOD Rated Output Power 500W Peak Power 1000W LiFePO4 ( Lithium iron phosphate ) Battery Type 220-230 VAC ( C14 socket ) Input Voltage 5A ( fuse protected ) Output Current (Max) Output Power (Max) 1150W...
The Device is a plug-and-play solution. Other than adhering to the safety precautions and operating instructions, there is no other installation requirements. The following is supplied with the Device: • Volta 500 unit • AC Power Input Cord - C13/3-point plug cable, 10A, typ. 1.5m (“kettle cord”) •...
OR use a wet cloth to wipe the unit. 5. Customer Portal The Customer portal is where the User can review, order and manage Stage Zero solutions. It is also from where the User can request support via logging a ticket on the Help tab.
Note: When a serious issue occurs such as a fire or complete power outage outside of load shedding, it is recommended to call the stage zero help line which is shown on the cus- tomer portal under the help tab.
Troubleshooting Problem Possible Cause Solution(s) • Switch off Device and check that connected load does not exceed 500W (use device specification labels). The Device is • If devices do not exceed 500W, switch overloaded ( single/ on Device and if beeping noise does combined load of not reoccur, continue operation.