Minelab X-TERRA PRO Instruction Manual page 20

Vibration
X‑TERRA PRO has a Vibration feature that provides tactile
feedback though the detector handle�
Vibration intensity varies in proportion to the target signal
strength (for both regular detecting and in Pinpoint Mode)�
The Vibration setting is remembered after the detector
is powered Off� If Vibration is On when the detector is
powered Off there will be a brief vibration pulse at start‑up�
Master Vibration is Off by default�
TURNING MASTER VIBRATION ON / OFF
1. Navigate to the Volume Adjust setting�
2. Press the Frequency button to toggle
Master Vibration On/Off�
TURNING FERROUS VIBRATION ON / OFF
When Master Vibration is On, Ferrous Vibration becomes
available and can be toggled On/Off�
Ferrous Vibration is turned Off by default when Master
Vibration is first enabled�
1. Navigate to the Volume Adjust setting�
2. Long‑press (2 seconds) the Settings button to enter
the Tone Volume Advanced Setting�
(2 Seconds)
3. Press the Frequency button to toggle
Ferrous Vibration On/Off�
CONTENTS
20