Table of Contents

Advertisement

LEVELS

(2/2) / FILTERS

Coolant level
Check the level on flat ground, with the
engine switched off. When cold, the
level must be between the MINI and
MAXI marks on the reservoir 1.
Top this level up when cold before it
reaches the MINI mark.
No operations should be
carried out on the cooling
circuit when the engine is
hot.
Risk of burns.
Checking intervals
Check the coolant level regularly
(very severe damage is likely to be
caused to the engine if it runs out of
3
coolant).
If the level needs to be topped up, only
use products approved by our Technical
Department which ensure:
– protection against freezing.
– anti-corrosion protection of the cool-
ing system.
Replacement intervals
Refer to the Maintenance Schedule for
your vehicle.
When working in the engine
compartment, ensure that
the windscreen wiper stalk
is in the park position.
Risk of injury.
Consult an approved dealer at once
if you notice an abnormal or re-
peated drop in any of the fluid levels.
Filters
The replacement of filter elements
(air filter, cabin filter, fuel filter, etc.) is
scheduled in the maintenance opera-
tions for your vehicle.
Replacement intervals for filter ele-
ments: please refer to your vehicle's
maintenance schedule.
Before carrying out any
action in the engine com-
partment, you must switch
off the ignition.
The engine may be hot
during operations in close
proximity. In addition, the
engine cooling fan may
come on at any moment.
Risk of injury.
4.7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents