Oki ML490 User Manual page 33

Menu Settings Table (Continued)
Group Item
Parallel I/F I-Prime
Pin 18
Auto Feed XT*
Bi-Direction
Serial IF† Parity
Serial Data 7/8 Bits
Protocol
Diagnostic Test
Busy Line
Baud Rate
DSR Signal
DTR Signal
Busy Time
* Appears only when the Epson LQ emulation is selected.
† Appears only when the optional Serial Interface is installed.
Settings (Defaults are set in bold italic)
Buffer Print, Buffer Clear, Invalid
+5V, Open
Invalid, Valid
Enable, Disable
None, Odd, Even
8 Bits, 7 Bits
Ready/Busy, X/On / X/Off
No, Yes
SSD-, SSD+, DTR, RTS
19200 bps, 9600 bps, 4800 bps, 2400 bps, 1200 bps, 600 bps, 300 bps
Valid, Invalid
Ready on Power Up, Ready on Select
200 ms, 1 sec.
33
Menu Mode