Setup and Diagnostic Utilities
Selecting from the Tools Menu
Select
HDD Self Test Options
Selecting from the Advanced Menu
Select
Language (or press
Boot Options
Device Options
7–6
To Do This
Run a quick or comprehensive self test on any
hard drive in the system.
To Do This
F2
)
Change the Computer Setup language.
Enable/disable:
I
QuickBoot, which starts the notebook more
quickly by eliminating some startup tests. (If
you suspect a memory failure and want to test
memory automatically during startup, disable
QuickBoot.)
I
MultiBoot, which sets a startup sequence that
can include most bootable devices and media
in the system. For instructions, see Chapter 5,
"MultiBoot (Advanced Users Only)."
I
Enable/disable Num lock mode at startup.
I
Enable/disable multiple standard pointing
devices at startup. (To set the notebook to
support only a single, usually nonstandard,
pointing device at startup, select Disable.)
I
Select a parallel port mode: EPP (Enhanced
Parallel Port), standard, bidirectional, or ECP
(Enhanced Capabilities Port).
continued
Software Guide