Oki C530dn User Manual page 39

ITEM
OVERRIDE Yes
A4/LT
NO
RESOLUTIO 600DPI
N
600x1200D
PI
600DPI
MULTI-
LEVEL.
TONER ON
SAVE MODE
OFF
MONO- Auto
PRINT
COLOR
SPEED
SPEED
NORMAL
SPEED
ACTION
If enabled, when the paper size of a job is set
to A4 but there is no A4 paper loaded in the
printer, if there is Letter paper in the printer,
the job will print on Letter paper without
requesting the user to fill the paper tray with
A4 paper.
Similarly, when the paper size of a job is set
to Letter but there is no Letter set in the
printer, if there is A4 paper in the printer, the
job will be printed on A4 paper without
requesting the user to fill the paper tray with
Letter paper.
Sets default resolution.
This function works effectively only if the
data input is color RGB data. This setting is
valid in PS and PCL, but does not take effect
in the following cases.
(1) PS: If Color Matching is set OFF.
(2) PS: If any setting other than ASIC Color
Matching is set.
(3) PS: CMYK data when Ink Simulation Mode
is used (valid in any other cases except Case
(1) and Case (2) above as long as data is
RGB).
(4) PCL binary data (Color/Monochrome).
• Sets the monochrome print speed. Prints
• Prints always at the color print speed if
• Prints always at the monochrome print
39
– C330/C530 Menu Functions
EXPLANATION
at the most appropriate speed for page
process if Auto is set.
Color is set.
speed if Normal is set.