Timer; Child-Proof Lock; Operating The Oven; Before Using The Oven - LG WSEZM7225S2 Owner's Manual

Table of Contents

Advertisement

1
Press the Clock button
knob to set the overall cooking / baking time.
2
Press the Start / Pause button
the cooking process.
3
Press the On / Off button
time.
CAUTION
• After the appliance switched off, it becomes very
hot especially inside the cavity. Never touch the
interior surfaces of the appliance or the heating
elements.
• Use oven gloves to remove accessories or
cookware from the cavity, and allow the
appliance to cool down.
• Keep children at a safe distance at the same time
to avoid the injury of burns.
NOTE
• Changing modes/temperature/rest cooking
time may have some negative influences for the
result of cooking. It is recommended not to do so
unless you are well experienced on cooking.
• To change the heating type and temperature
during cooking, turn the oven mode knob or
setting knob at any time. If no other actions are
taken within 6 seconds of changing settings, the
oven starts to heat with new setting.

Timer

The timer can be set before and during cooking
process. The timer is not available when function
and temperature settings are being changed.
1
Press the Timer button
hours.
2
Press the Timer button
timer in minutes.
3
Press the Timer button
y
and turn the setting
{
|
,
to start
t
to cancel at any
x
to set the timer in
x
again to set the
to accept changes.
x
4
When the set time runs out, a "beep" sounds.

Child-Proof Lock

Child-Proof Lock is to help prevent children from
accidentally turning on the oven or change any
settings. Child-Proof Lock is available at any time
when the oven is in use or not in use.
1
Press the Child-Proof Lock button
seconds to activate. Child-proof lock icon
appears in the display.
2
Press the Child-Proof Lock button
3 seconds to deactivate.

Operating the Oven

Before Using the Oven

Before using the oven to prepare food for the first
time, you must clean the cavity and accessories.
1
Remove all stickers, surface protection foils
and transport protection parts.
2
Remove all accessories and the side-racks from
the cavity.
3
Clean the accessories and the side-racks
thoroughly using soapy water and a dish cloth
or soft brush.
4
Ensure that the cavity does not contain any
leftover packaging, such as polystyrene pellets
or wooden piece which may cause risk of fire.
5
Wipe the smooth surfaces in the cavity and the
door with a soft, wet cloth.
6
To remove the new-appliance smell, heat up
the appliance when empty and with the oven
door closed.
OPERATION
19
for 3
k
k
k
again for

Advertisement

Table of Contents
loading

Table of Contents