Table of Contents
Advertisement
Changing Settings
Clock
The clock must be set to the correct time of day in
order for the automatic oven timing functions to
work properly.
1
Press Clock.
2
Press the numbers to set the time. For
example, to set the clock for 10:30, press the
numbers: 1, 0, 3 and 0.
3
Press START.
NOTE
• The time of day cannot be changed during a
timed baking or self-clean cycle.
• To check the time of day when the display is
showing other information, press Clock.
• If no other buttons are pressed within 25
seconds of pressing Clock, the display reverts to
the original setting.
• If the display time is blinking, there may have
been a power failure. Reset the time.
Timer On/Off
The Timer On/Off serves as an extra timer in the
kitchen that beeps when the set time has run out.
It does not start or stop cooking.
The Timer On/Off feature can be used during any
of the other oven control functions.
For example, to set 5 minutes:
1
Press Timer On/Off once.
0:00 appears and Timer flashes in the display.
2
Press 5.
0:05 appears in the display.
3
Press Timer On/Off to start the Timer. The
remaining time countdown appears in the
display.
NOTE
• If Timer On/Off is not pressed, the timer returns
to the time of day.
4
When the set time runs out, End shows in the
display. The indicator tones sound every 15
seconds until Timer On/Off is pressed.
NOTE
• If the remaining time is not in the display, recall
the remaining time by pressing Timer On/Off.
• Press Timer On/Off once to set the time in
hours and minutes.
• Press Timer On/Off twice to set the time in
minutes and seconds.
Canceling the Timer
1
Press Timer On/Off once.
The display returns to the time of day.
Settings (Hour Mode, Convection
Auto Conversion, Oven
Temperature, Display Language,
Preheat Alarm Light, Beeper
Volume, Fahrenheit or Celsius)
Press the Settings button repeatedly to toggle
through and change oven settings.
The Settings button allows you to:
• set the hour mode on the clock (12 or 24 hours)
• enable/disable convection auto conversion
• adjust the oven temperature
• select display language
• activate/deactivate the preheating alarm light
• set the beeper volume
• switch the temperature scale between
Fahrenheit and Celsius
Setting the Hour Mode
The control is set to use a 24-hour clock. To reset
the clock to 12-hour mode, follow the steps below.
1
Press Settings once.
OPERATION
11
Advertisement
Table of Contents
