Table of Contents
Advertisement
1
Remove the appliance door first before
removing the door cover. Press the lockers on
both sides of the cover.
2
Remove the cover.
3
After removing the door cover, the rest parts of
the appliance door can be easily taken off so
that you can go on with the cleaning. When the
cleaning of the appliance door has finished,
put the cover back in place and press the
lockers until they clicks audibly into place.
4
Assemble and refit the appliance door.
CAUTION
• Do not remove the door cover without the
appliance door removed beforehand. Damage
caused by incorrect operation is not covered
under warranty.
• Keep your hands away from the hinges when
removing the door cover and inner glass and/or
closing the door.
NOTE
• Once the door cover is removed, the inner glass
can be easily moved and it can cause damage
and/or injury.
• Remove the door cover and inner glass to reduce
the overall weight of the appliance door.
Changing the Power Cord
1
The terminal box is located on the back of the
back outer case.
2
Cut off the power. Use a small flat screwdriver
to open two snaps
3
Use a Phillips screwdriver to take off screws
,
and
.
d
e
f
MAINTENANCE
and
.
a
b
33
,
c
Advertisement
Table of Contents
