Can Function - Ebyte ECAN-W01S User Manual

Chengdu Ebyte Electronic Technology Co.,Ltd
Manual
(2) This mode is usually used in data transmission scenarios where multiple network devices
need to communicate with modules and do not want to use TCP due to high speed and frequency.
Note: UDP Server cannot actively send data. Only after receiving the data can it send the
data to the IP and port that has recently conducted data interaction.
→ CAN part

4.2.6. CAN function

category
CAN
configura
tion
©2012–2022, Chengdu Ebyte Electronic Technology
Copyright
name default
CAN baud
100K
rate
CAN operating
normal
mode
Number of
subcontractin 50
g frames
There are 10 options from 5K to 1000K. You
can also fill in any baud rate value
Normal: CAN port can normally respond to
received CAN frame;
The value that can be filled in is 1~50. When
the CAN port continuously receives data (the
interval is less than the packet time
interval), and the number of received CAN
frames reaches the "number of packet frames",
the received data will be packaged into an
Ethernet packet and sent to the network port.
The number of frames in the packet refers to
the maximum number of frames in the packet.
If the number of frames in the packet is not
reached during the receiving process, but the
frame interval exceeds the packet time
interval, the received data will also be
packaged into an Ethernet packet for
transmission. If the number of sub packet
frames is set to 1, it means that there is no
sub packet, and each CAN frame is sent as an
Ethernet packet separately. At this time, the
real-time performance is the strongest, but
the network load is the highest; If the number
Co.,Ltd
explain
ECAN-W01S User