InfiRay iRay RH25 Quick Start Manual

iRay RH25 / PFalcon 640+ Thermal Imager
Full Manual
https://cdn.ultimatenightvision.com/pdf/manuals/IRAYUSA+RICO+micro+manual_03-02-22.pdf
The explanation of how to turn on the Standalone/ Reticle mode (i.e. using your iRay RH25 /
PFalcon 640+ Thermal Imager as a standalone aiming device with a reticle) is inconsistent in
the above referenced manual.
Enabling Standalone/Reticle Mode
Step 1: Turn on your iRay RH25 / PFalcon 640+ Thermal Imager and ensure that the buttons
on top of the thermal are facing towards your ceiling, which ensures that you are not in Helmet
mode.
Step 2: Ensure you are in Handheld Mode and not in Clip-On Mode. You know you are in
Handheld Mode if you see a small hand symbol (
Should you be in Handheld mode you can proceed to Step 3, should you be in Clip-On Mode,
as indicated by the Clip-On symbol (
proceed with Step 2b through 2d first.
Step 2b: Press the Menu button (
Step 2c: Use the Power (
through the Main Menu until you reach the Working Mode icon (
) button once to open the Working Mode Settings.
Step 2d: Use the Power (
select between the Handheld Mode (
have selected the Handheld Mode (
the Menu (
Menu ( ) button one more time to close the Main Menu. If you have done everything
right you are back on the viewing screen and should see the Handheld Mode (
symbol in the top left hand corner of your screen.
Enabling Standalone/ Reticle Mode
) and Photo (
) and Photo (
) button until the Working Mode Settings collapse. Press and hold the
) in the top left corner of your screen.
) in the top left corner of your screen, you have to
) once to open the Main Menu.
) buttons as left and right buttons to move
) buttons as up and down buttons to
) and the Clip-On Mode (
), confirm your selection by pressing and holding
). Press the Menu (
). Once you
)