Table of Contents
Advertisement
Maintenance
Recommended Maintenance Schedule(s)
Maintenance Service
Interval
After the first 2 hours
After the first 10 hours
Before each use or daily
After each use
Every 50 hours
Every 400 hours
Daily Maintenance Checklist
Duplicate this page for routine use.
Maintenance Check Item
Check the grass deflector
in the down position (if
applicable).
Check the tire pressure.
Check the condition of the
blades.
Lubricate all the grease
fittings.
1
Touch-up damaged paint.
1. Immediately after every washing, regardless of the interval listed.
Notation for Areas of Concern
Inspection performed by:
Item
CAUTION
If you leave the key in the ignition switch, someone could accidently start the engine and
seriously injure you or other bystanders.
Remove the key from the ignition before you do any maintenance.
Maintenance Procedure
• Tighten the castor wheel nuts.
• Tighten the castor wheel nuts.
• Lubricate the castor arm bushings.
• Lubricate the castor wheel bearings.
• Clean the cutting unit.
• Lubricate the grease fittings.
• Check the gearbox lubricant.
• Tighten the castor wheel nuts.
• Check the blade drive belt adjustment.
• Clean under the cutting unit belt covers.
• Change the gearbox lubricant.
For the week of:
Mon.
Tues.
Wed.
Thurs.
Date
Information
17
Fri.
Sat.
Sun.
Advertisement
Table of Contents
