Table of Contents
Advertisement
5
Greasing the Machine
No Parts Required
Procedure
Before operating the machine, it must be greased
to ensure proper lubricating characteristics; refer to
Lubrication (page
18). Failure to properly grease the
machine will result in premature failure of critical parts.
Product Overview
Specifications
Note:
Specifications and design are subject to
change without notice.
Width
1.52 m (60 inches)
of Cut
Height
Adjustable from 25 to 127 mm (1 to 5 inches) in 13
of Cut
mm (1/2 inch) increments
Net
204 kg (450 lb.)
Weight
Attachments/Accessories
A selection of Toro approved attachments and
accessories is available for use with the machine
to enhance and expand its capabilities. Contact
your Authorized Service Dealer or authorized Toro
distributor or go to www.Toro.com for a list of all
approved attachments and accessories.
To ensure optimum performance and continued safety
certification of the machine, use only genuine Toro
replacement parts and accessories. Replacement
parts and accessories made by other manufacturers
could be dangerous, and such use could void the
product warranty.
10
Advertisement
Table of Contents
