Meinberg DI/BGT TTL Quick Start Manual
Meinberg DI/BGT TTL Quick Start Manual

Meinberg DI/BGT TTL Quick Start Manual

Signal diplexer in modular 3u case

Advertisement

Quick Links

DI/BGT: TTL Signal Diplexer in modular 3U Case
Distribution Unit for TTL pulses and frequencies input and outputs in modular case:
DI/BGT is built-up in a 19" modular chassis with included power supply. The diplexer is equipped with BNC
connectors for the input as well as for the outputs.
distribution module:
* 1 x TTL input, BNC connector
32 x TTL outputs via BNC connectors
Key Features
- Distributes a single or two input TTL signals to 32 - 64 TTL level outputs via different connector types
(BNC, DFK, ST connector ...)
- Also available for IRIG Time Codes (AM/DCLS)
- Redundant hardware configuration with two independant input signals, two power supplies and up to 32
output connectors for each module.
rev 2023.0102.1028
Standard configuration with single signal
Page 1/3
Meinberg Radio Clocks
Lange Wand 9
31812 Bad Pyrmont, Germany
Phone: +49 (5281) 9309-0
Fax:
+49 (5281) 9309-30
https://www.meinbergglobal.com
info@meinberg.de
di-bgt

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DI/BGT TTL and is the answer not in the manual?

Questions and answers

Summary of Contents for Meinberg DI/BGT TTL

  • Page 1 Meinberg Radio Clocks Lange Wand 9 31812 Bad Pyrmont, Germany Phone: +49 (5281) 9309-0 Fax: +49 (5281) 9309-30 https://www.meinbergglobal.com info@meinberg.de DI/BGT: TTL Signal Diplexer in modular 3U Case Distribution Unit for TTL pulses and frequencies input and outputs in modular case: DI/BGT is built-up in a 19"...
  • Page 2 Optionally we can add an SCU switch card logic (also available as SCU-XPT with network management functionality) combined with an error signal input to manage the SCU card automatically when an error occurs from the connected Meinberg RADIO CLOCK. The DI/BGT can be equipped with two power supplies for full redundant operation.Possible configuration options:...
  • Page 3 WEEE-compliant fashion, it can be returned to the manufacturer. Any transportation expenses for returning this product (at end-of-life) must be covered by the end user, while Meinberg will bear the costs for the waste disposal itself.

Table of Contents