Warranty And Liability - S&P CAD HE 325 EC V BASIC Manual

1.3 Warranty and Liability

Warranty
The unit supplied by S&P is warranted 2 years. Parts only starting from the invoicing date.
S&P agrees to replace the parts or the unit whose operation is recognized defective by our
departments except for all damages and interests or penalties such as operating losses,
commercial prejudice, or other immaterial or indirect damages.
The following are not covered by our warranty: defects resulting from an abnormal usage or
a usage not conforming to the recommendations of our manuals; faults observed as a
consequence to normal wear; incidents caused by negligence, lack of monitoring, or
servicing; faults due to the incorrect installation of the devices or to bad storage conditions
before mounting.
In any case, S&P will not be responsible for transformed unit, repaired even partially.
23