Advertisement
4.12. Connection of the electric lock with an additional source.
Fig.2
Set up Jumpers
Power
Gate Lock
Door Lock
(1) Supported door locks: NO (normally open) lock, it is unlocked by switching on.
AC/DC5V-24V lock support, ≤ 3A (Instant).
(2) Jumper settings: As shown in Figure 2.
(3)
Set the type and time of unlocking the lock:
In the main menu of the 2-wire internal monitor in "Settings", select the option "Device
configuration",
go to the "List of entry stations" to mark the door station, in the menu "Add to the list of
monitoring
device" select "Edit" , enter the correct password and enter the modification interface.
Select the lock type and set the unlock parameters "Alarm Status" to "On" or "Off" and the
required time in the "Unlock Time" menu.
Advertisement
