Advertisement
5.3 Assembly
(1) Drill 4 holes according to location and insert dowels into the hole.
(2) Remove the front panel, insert the label and screw the front panel back on.
(3) Fix the mounting box with 4 screws.
(4) Connect the cable according to the system connection diagram.
(5) Fix the entrance station to the assembly box using the included hex cage
(1) Make a hole in the wall according to the size of the mounting box and insert dowels into
the hole.
(Note: 2 fixing screws are already
6. Technical specification
№
Info
1
Communication
2
Number of participants
3
Audio
4
Video
5
Camera
6
Night light
7
Effective distance (0
Lux)
8
Angle of view
9
Buttons
10
Power
11
Supported electric
Locks
12
Supported gateway
lock
13
Lock control
14
Electricity consumption
Energy
15
Working temperature
16
Storage temperature
the screw holes before, see c. (7) on page 1.).
installed in
Content
2 wires
1 participant / 2 participants
Two-way digital audio transmission
1-channel digital video output
1 MPx HD Color CMOS Camera
Infrared diodes
0.5 meters
110°(horizontal), 60°(vertical)
1 / 2 mechanical buttons
DC 24V
(1) Door lock without additional source:
NC lock DC12V 0.35A (Max) or
NO lock DC12V ≤2A (instantaneous).
(2) Door lock with additional source:
AC/DC5V-24V lock, current <3A.
One unlock signal (potential-free contact),
the current is less than 0.35A.
Switched contact
3W (without lock power consumption)
-25°C to +60°C
-30°C to +60°C
Advertisement
