Advertisement
In the main menu of the 2-wire internal monitor in "Settings", select the option "Device
configuration", go
on the "List of entry stations" mark the door station, in the menu "Add to the list of
monitoring devices"
select "Edit" , enter the correct password and enter the modification interface. Go to
"Button Address" to set the call destination for each button.
5. User Manual
5.1 Warning
(5.11) Selecting the appropriate installation position to avoid direct sunlight and rain.
(5.12) Proposed installation height: 1.5 ~ 1.6 meters
(5.13) Before completing the installation, make sure that the power supply is not connected
5.2 Wire length
Themost large length of wires is limited by the use of different cables.
Cable length.
1. Cables maybe unenled.
2.Distance L2 means the distance from the entrance station to the power supply of the
system.
3.Distance L1 means the total distance of the 2-wire bus.
4.The same bus should use the same conductor with the same specification.
1Installation may be carried out by a person who is knowledgeable and properly trained
for VERIA systems.
NOTE: For security reasons, do not connect the videophone monitor to the power grid
before installation is complete. When installing the entrance station in
a place with insufficient
children
to
device,
protection for those
,
extend the life of the
we strongly recommend filling the
Advertisement
