Springdale Lighting SAT11122 Assembly Instructions

Available languages

ASSEMBLY INSTRUCTIONS

Item No: SAT11122

1. Place the lamp on a level surface.

2. Insert harp into the saddle.

3. Place the shade over the end of the harp and tighten

with the finial securing the shade in place.

To Replace the Night Light Bulb

1. Loosen the wing nut under the base.

2. Pull the glass down and insert the night light bulb

into the socket.

3. Reconnect the glass with the cap.

4. Replace the wig nut and tighten to secure the base.

Uses (1) Maximum 60Watt Type B Bulb,

(Bulb not included)

and (1) maximum 7Watt Type C Night Light Bulb

(Bulb Included)

Unplug lamp. Wipe with a dry cloth only.

Do not use abrasives.

*SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

Made in China

FOR RETURN SHIPPING PURPOSES:

PLEASE RETAIN ORIGINAL PACKAGING

TO MINIMIZE DAMAGE.

Revision – 08/30/11

Table of Contents

Do you have a question about the SAT11122 and is the answer not in the manual?

Page 1 ASSEMBLY INSTRUCTIONS FOR RETURN SHIPPING PURPOSES: Item No: SAT11122 PLEASE RETAIN ORIGINAL PACKAGING TO MINIMIZE DAMAGE. 1. Place the lamp on a level surface. 2. Insert harp into the saddle. 3. Place the shade over the end of the harp and tighten with the finial securing the shade in place.
Page 2 INSTRUCIONES DE ASAMBLEA: PARA RAZONES DE REGRASAR: POR FAVOR CONSERVE EL IMPAQUETADO ORIGINAL Modelo: SAT11122 PARA REDUCIR DAÑOS MINIMO. 1. Coloque la base en una superficie llana. 2. Conecte la arpa en la silla de montar. 3. Coloque la pantalla sobre la arpa y apriete con el remate asegurando la pantalla en su lugar.