Hanseatic HG4585C10T7636EI User Manual page 76

Page EN-32 Set-up, connection and initial start-up
Recess dimensions
(35)
3. Affix the condensation protection film sup-
plied (35) to the underside of the worktop.
In this way, you will avoid damage to the
worktop as a result of hot steam which
may be emitted from the dishwasher if the
dishwasher door is left open.
4. Place the appliance in the desired posi-
tion.
90°
820 mm
580 mm
Inlet/outlet area and
electrical connection.
450 mm
90°
80 mm
100 mm
5. In order to compensate for uneven floor
surfaces and set up the appliance hori-
zontally, you can screw the four adjusta-
ble feet (31) in or out. The adjustable feet
have slots around their circumference.
Insert a screwdriver and turn the adjust-
able foot.
Use a spirit level to set up the appliance.
(31)