Rheem TRITON GHE80SS Service Training Manual page 57

DISASSEMBLY AND REPAIR
14. Reconnect the lead from the flame rod sensor to the con-
trol box.
15. Reconnect the two leads to the low gas pressure. (It does
not matter which lead is connected to which tab.)
16. Reconnect the two harnesses to the front of the blower.
17. Reattach the cable harness to the top of the valve and
secure it with the screw.
18. Reattach the intake hose to the front of the gas valve and
the POF switch to the bottom of the blower.
57
Rheem TRITON TM
Service Manual