Setup And Moving; First-Time Setup - Stern Pinball WRESTLEMANIA WWE PRO Service And Operation Manual

1. SETUP AND MOVING

1.1 FIRST-TIME SETUP

Your brand new Stern Pinball Machine is
carefully packed for safety and security.
For your safety, exercise caution and use
the correct tools and sufficient help when
setting up your new game.
2
1
1. Locate the side labeled "TRUCK THIS
SIDE ONLY". The bottom of the game
faces this side.
2. Open the top box flaps by pulling
hard in an upward motion on each
flap. If the flaps are taped, cut the
tape first, taking care to avoid the box
staples.
8
8
9
8. Install front legs using the bolts
removed from Step 5. Secure
tightly.
9. Use a helper to carefully set the
game down on the front legs.
WWE and related marks
™ & © 2014 WWE. All Rights Reserved.
TOOLS REQUIRED
• 5/8" Socket Wrench
• Utility Knife
• Snips
• A Helper
2
5
6
3. Remove the four (4) foam pieces
and two (2) narrow box tubes which
contain the four (4) identical legs with
levelers.
4. DO NOT CUT STRAPPING YET.
Keep backbox secured in the down
position.
5. With the utility knife, carefully cut
down the left and right corners of the
box.
10. Set aside the open box.
11. With the ⅝" socket wrench, loosen
and remove the 2 leg bolts on each
side of the rear cabinet, 4 total.
12. Using supports or two people, prop
the rear of the cabinet up.
WWE PRO MANUAL #780-50G1-00
SETUP AND MOVING
CAUTION
AT LEAST TWO (2) PEOPLE ARE RE-
QUIRED TO MOVE AND MANEUVER
THE GAME. USE PROPER MOVING
EQUIPMENT AND EXTREME CARE
WHILE HANDLING. STERN PINBALL
MACHINES WEIGH OVER 250LBS
BOXED.
7
5
6. Let the face fall forward and remove
the entire side by carefully cutting the
bottom.
7. With the game still in its folded posi-
tion, use a ⅝" wrench to loosen and
remove the 2 leg bolts on each side
of the front cabinet. Ensure the leg
levelers are screwed all the way in to
the legs.
11
11
13. Ensure the rear leg levelers are
screwed all the way into the legs.
14. Install rear legs using the 4 bolts
removed from step 11.
15. Cut nylon strapping and remove pro-
tective strap corner guards
02/12/15
7
15
14
14
3