Numark CDN34 User Manual page 11

STARTING PLAY OPTIONS
Play can be started any 1 of 3 ways
1. Pressing the "PLAY/PAUSE" button
2. Pressing the "STUTTER" button as explained in the STUTTER SECTION
3. When the cue button is pressed a second time, it will temporarily play a section and will
stop it when the button is released. (to check a cue point)
SETTING OR EDITING A CUE/START POINT
The purpose of a cue point is to set a defined position in the music at which you would like to start playing the song. There
are 4 methods by which a cue point can be set.
1 . When a track is initially selected, a cue point
is automatically set after the elimination of
dead space. By alternately pressing the
"PLAY/PAUSE" button and the "CUE"
button, the disc may be returned and played
from the cue point any number of times. This
function is called "back cue".
Note: You can also preview a "CUE POINT" by holding down the "CUE" button a
second time. This will play the track from the cue point until you release it.
2 . The search and/or jog wheel is used
to set a different start point, also
referred to as editing. When the inner
search dial is turned while the unit is
paused, a new cue point can be
located. The CD player will repeatedly
play small parts of the CD as you move
it to the desired position. By pressing
"PLAY/PAUSE" then "CUE" you can
confirm this new cue point is desirable.
3 . Pressing the "PLAY/PAUSE" button starts the disc. Pressing the "PLAY/PAUSE" button when the disc is playing
then pressing it again sets a new cue point. You can edit this point with the jog wheel after you have paused as
described in the previous method. Pressing the "CUE" button the first time instead of the "PLAY/PAUSE" button
again will reset the disc to the previous cued position.
4 . The "LOOP IN" button is depressed during play for any reason as explained in LOOPING and STUTTERING.
©1999
Industries
- The Leader in DJ Technology
11
CDN-34
http://www.numark.com