Numark CDN34 User Manual page 10

CDN-34
LCD DISPLAY FEATURES
1. PLAY - active while the unit is actually playing a CD.
2 . P A U S E - active when the unit is paused.
3 . C U E - flashing when the unit is setting a cue point. Lit
continuously when the unit is paused at a cue point.
4. PROGRAM - used for pre-programming the track order
to automatically be played by the unit. This is a great
function if you need to leave the CD player alone.
5. TIME MODE - This function is controlled by
the TIME BUTTON (4)
(Elapsed) is for showing time as it is taking place.
(Remain) first time shows how much time is left on a
particular track.
(Remain) second time shows full time remaining on CD.
6 . S I N G L E - shows when the unit is set to play just one
track at a time. When this is not lit, the CD will play
continuously through all tracks.This function is
controlled by the SING/CONT BUTTON (2).
7 . P I T C H - is lit when the display is showing.
8. TIME BAR - shows either time remaining or elapsed
depending on the setting of the TIME BUTTON (4).
©1999
Industries
9 . P I T C H / B P M - shows either the percentage change in pitch
or the BPM of the song depending on the mode selected with
the BPM BUTTON (16).
10. TRACK - shows the track that the unit is playing.
1 1 . M I N U T E S - shows the minutes elapsed or remaining
depending on mode setting.
1 2 . S E C O N D S - shows the seconds elapsed or remaining
depending on mode setting.
13. FRAMES - the CD player breaks down a second into 75
frames for accurate cueing. This shows the frames elapsed
or remaining depending on mode setting.
1 4 . L O O P - shows when the CD is repeating a particular area
with the music on the CD.
1 5 . R E L O O P - shows when the CD has had a loop set
previously and can go back to it to loop again.
- The Leader in DJ Technology
10
http://www.numark.com