Table of Contents
Advertisement
Foreword
This AD Plus Installation Guide is hereby prepared to better guide engineering personnel to
install AD Plus and its accessories properly and quickly, and to improve installation
efficiency.
This document mainly includes the following parts: foreword, system overview, preparation
for installation, introduction to installation, and acceptance and cleaning.
This document is applicable to installation engineering personnel.
Streamax Technology Co., Ltd. has the right of final interpretation for this document, and
reserves the right to make corrections to this document or to make changes to the information
and description herein. No prior notice will be given if there is any change.
Important Instructions
1.
Before installation, please park the vehicle on the horizontal ground and shut down the
engine (do not park the vehicle on a ramp or an inclined road).
2.
Please read the section of packing list carefully and check carefully at the time of
unpacking.
3.
Please read the section of tool list carefully and provide installation tools before product
installation.
4.
Before installation, please observe the vehicle environment and follow the principles
below:
a.
The installation position and wiring of the product shall neither affect the driver's
view nor affect the adjustment of the rearview mirror and sun visor;
b.
The camera lens for monitoring the road condition ahead of the vehicle must be
within the working range of the windshield wiper;
c.
The installation position of the camera for monitoring the driver in the vehicle shall
comply with local regulations;
d.
The installation position shall be convenient for the replacement and maintenance of
Micro SD card and SIM card.
5.
The appropriate installation position shall be selected according to the vehicle
environment, and this document is for reference only.
6.
The appropriate power supply connection method shall be selected according to the
vehicle environment.
power supply and all signal cables of vehicle is required, and shall be carried out by
specialized personnel, as it may be dangerous for non-specialized personnel to
operate the power system of the vehicle without authorization.
reference only.
7.
In case of any problem in the installation for special vehicles, please contact the product
supplier in time for support.
8.
Veyes App is required to debug and configure AD Plus during installation.
9. Please scan the QR code below, or search and download the Veyes APP in the App Store.
After the download is completed, connect the APP to AD Plus for related operations
according to the prompt on the interface of the APP.
If discrete wire connectors are adopted, connection to the
Page 5 of 52
www.streamax.com
This document is for
Advertisement
Table of Contents
Need help?
Do you have a question about the AD Plus and is the answer not in the manual?