Advertisement
Notification of CE marking
The following products have shown compliance through direct testing (to the identified standards) and design analysis
(forming a technical construction file) to the European Directive for Electromagnetic Compatibility (2004/108/EC) when
used as directed by the appropriate documentation.
•
This product is designed for use in industrial applications.
•
Manufactured by: Mitsubishi Electric Corporation
2-7-3 Marunouchi, Chiyoda-ku, Tokyo 100-8310 Japan
•
Manufactured at: Mitsubishi Electric Corporation Himeji Works
840 Chiyoda-machi, Himeji, Hyogo 670-8677 Japan
•
Authorized Representative in the European Community: Mitsubishi Electric Europe B.V.
Gothaer Str. 8, 40880 Ratingen, Germany
Type
: Programmable Controller (Open Type Equipment)
Models : MELSEC GOT series products, identified here, manufactured from
December 1st, 2009 F920GOT-BBD5-K-E
Standard
EN61131-2 : 2007
Programmable controllers
- Equipment, requirement and tests
For more details please contact the local Mitsubishi Electric sales site.
Notes Regarding the Use of GOT Units
General notes on the use of Communication Cables
Any device which utilizes a data communication function is susceptible to the wider effects of local EMC noise. Therefore,
when installing any communication cables care should always be taken with the routing and location of those cables. The
GOT units identified on the previous page are compliant with the EMC requirement when the following communication
cables are used:
GOT Units
F920GOT-BBD5-K-E
F920GOT-BBD-K-E
When using the FX-50DU-CAB0/EN cable the Earth Strap must be connected to a suitable earth point.
Ex. 1
Programmable
Controller
E = Additional earth strap connected to the cables shield. Free end of the earth strap must be connected to an earth
point.
F = Ferrite core
Ex. Tokin - ESD-R-17S or similar
Warranty
Mitsubishi will not be held liable for damage caused by factors found not to be the cause of Mitsubishi;
opportunity loss or lost profits caused by faults in the Mitsubishi products; damage, secondary damage,
accident compensation caused by special factors unpredictable by Mitsubishi; damages to products
other than Mitsubishi products; and to other duties.
For the detailed warranty, refer to the GOT-F900 Series HARDWARE MANUAL [CONNECTION].
HEAD OFFICE
HIMEJI WORKS
F920GOT-BBD-K-E
Compliance with all relevant aspects of the standard.
EMI
(Radiated Emissions)
Compliance with all relevant aspects of the standard.
EMS
(ESD, RF electromagnetic field, EFTB, Surge, RF conducted
disturbances and Power frequency magnetic field)
Existing Cables
FX-50DU-CAB0/EN
and
FX-50DU-CAB0 modified as
shown in EX.1
FX-50DU-CAB0
F
F
Manual number : JY997D02201
Manual revision : G
Date
: TOKYO BUILDING, 2-7-3 MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN
: 840, CHIYODA CHO, HIMEJI, JAPAN
Remark
User Made Cables
This cable need to be independently tested by the
user to demonstrate EMC compatibility when they
are used with Mitsubishi GOT units and
Programmable Controllers.
110 (4.33")
F
E
: Aug. 2010
GOT units
Unit: mm (inches)
Advertisement
