Mitsubishi MELSEC GOT-F900 Installation Manual

This manual contains text, diagrams and explanations which will guide the reader in the correct installation, safe use and
operation of the F920GOT-BBD5-K-E, F920GOT-BBD-K-E and should be read and understood before attempting to
install or use the unit. Further information can be found in the associated manuals list below.
Specifications are subject to change without notice
Guidelines for the Safety of the User and Protection of the F920GOT-BBD5-K-E,
F920GOT-BBD-K-E
This manual has been written to be used by trained and competent personnel. The definition of such a person or persons
is as follows:
a) Any engineer using the product associated with this manual, should be of a competent nature, trained and
qualified to the local and national standards. These engineers should be fully aware of all aspects of safety with
regards to automated equipment.
b) Any commissioning or service engineer must be of a competent nature, trained and qualified to the local and
national standards.
c) All operators of the completed equipment (see note) should be trained to use that product in a safe manner in
compliance to established safety practices.
Note: The term 'completed equipment' refers to a third party constructed device which contains or uses the product
associated with this manual.
Note's on the Symbols Used in this Manual
At various times through out this manual certain symbols will be used to highlight points of information which are intended
to ensure the users personal safety and protect the integrity of equipment.
1) Indicates that the identified danger WILL cause physical and property damage.
2) Indicates that the identified danger could POSSIBLY cause physical and property damage.
• Under no circumstances will Mitsubishi Electric be liable or responsible for any consequential damage that may arise
as a result of the installation or use of this equipment.
• All examples and diagrams shown in this manual are intended only as an aid to understanding the text, not to
guarantee operation. Mitsubishi Electric will accept no responsibility for actual use of the product based on these
illustrative examples.
• Please contact a Mitsubishi Electric distributor for more information concerning applications in life critical situations
or high reliability.
Associated Manuals
Manual Name
F920GOT-BBD5-K-E,
F920GOT-BBD-K-E
Installation Manual
GOT-F900
OPERATION MANUAL
(describes GT Designer2)
GOT-F900 Series
Operation Manual
GOT-F900 Series
Hardware Manual
(connection diagram)
SW D5C-GOTR-PACK
Operating Manual
GT Designer2 Version 1
Operating Manual
GT Designer2 Version 1
Reference Manual
FX-PCS-DU/WIN-E
SOFTWARE MANUAL
Necessary manual
Either manual is necessary.
Refer to the manual of the connected programmable controller for further details concerning that unit.
Manual Number
JY997D02201
(This manual)
JY997D09101
(separate volume)
JY992D94701
(separate volume)
JY992D94801
(separate volume)
(included with screen
creation software)
(PDF files on CD-ROM
included with screen
creation software)
(PDF files on CD-ROM
included with screen
creation software)
JY992D68301
(included with screen
creation software)
F920GOT-BBD5-K-E
F920GOT-BBD-K-E
Installation Manual
JY997D02201G
Describes the hardware such as specifications, wiring and
installation of the F920GOT-BBD5-K-E and F920GOT-BBD-
K-E.
Describes the operation and use of the GOT-F900 Series
graphic operation terminals and GT Designer2.
Describes the operation and use of the GOT-F900 Series
graphic operation terminals, GT Designer and FX-PCS-DU/
WIN-E.
Describes wiring and installation of the GOT-F900 Series
graphic operation terminals.
Describes the operating procedures of the screen creation
software. (See the HELP file in the software.)
Describes the operation method of GT Designer2
(SW D5C-GTD2-J), data transfer to the GOT-900 Series,
etc.
Describes the specifications, contents of setting, etc. of
each object function used in GT Designer2 (SW D5C-
GTD2-J).
Describes the operation of FX-PCS-DU/WIN-E screen
creation software.
Description