Keypad Beep; Dual Watch Mode - Baofeng MP25 Series Owner's Manual

3) Press the [PTT] button to exit menu or [ /MENU] button to continue set up.
WARNING: The Distress Alert feature should only be used in a true emergency. If the receiving group does not respond to the
distress signal, Baofeng will not assume any responsibility.

Keypad beep

To deactivate the keypad beep, follow these steps:
1) Press the [ /MENU] button 7 times and until "
2) Use the [ ] or [ ] buttons until the display shows "
3) Press the [PTT] button to exit menu or [ /MENU] button to continue set up.
Now you won't hear any beep at the pressure of any button.
ROGER BEEP (End transmission tone)
When the PTT button is released, the radio will beep to confirm to other users that your transmission has finished.
To deactivate it:
1) Press the [ /MENU] button 8 times and until the display shows "
2) Using the buttons [
3) Press the [PTT] button to exit menu or [ /MENU] button to continue set up.

Dual Watch Mode

Your radio has a DUAL WATCH function, to enable user to scan 2 channels for any activity. The first channel will be the
current channel setting and the second channel will be the selected channel on the.
To set another channel and start Dual Watch:
1) Press the [ /MENU] button 9 times and until the display shows "
2) Using the buttons [
3) Using the buttons [
4) The radio starts to Dual Watch.
The screen will alternate between home channel and Dual Channel Monitor channel.
] or [ ] select "off" and "
] or [ ] select the channel, then press [ /MENU].
] or [ ] select the CTCSS/DCS, then press [ /MENU].
" is displayed.
".
";
" will be displayed;
";