Advertisement
4
At most a hundred (100) entries will be stored in every 10 seconds interval
and displayed as follows on the debug port as well as the serial port.
asxd:
asxd:
asxd:
Using the configuration vcc show commands as below, the connection
corresponding to the INFO (1) and (2) above for 'Output Port: CTL, VP 0,
VC 34' is found to be '1A1
Therefore, with this information it can be concluded that the OAM Payload
Type cells are being received from Input Port 1A1, VPI 0, VCI 5 which are
being sent to the Control Port (i.e. the SCP) on VPI 0, VCI 34.
localhost::configuration vcc> show
Input
Port VPI VCI Port VPI VCI UPC Protocol
1A1
1A1
1A1
1A1
suspectcells
- usage: suspectcells
the Control Port to block and cause all the SPANS and UNI signalling
channels to remain in 'down' state.
localhost::operation oampt> suspectcells
Total:10 Delta:2
The Total counts gives the total cells of this type received and the Delta
gives the count of such cells received since the last time this command was
used.
totalcells
- usage: totalcells
successfully discarded. This count includes the count for 'suspectcells'
localhost::operation oampt> totalcells
Total:5968 Delta:4513
The Total counts gives the total cells of all OAM Payload Type received and
the Delta gives the count of such cells received since the last time this
command was used.
resetcounters
- usage: resetcounters [(suspectcells)|(totalcells)|(all)]
Magellan Vector 1.1 Release Notes
INFO: oamPT cells found in last 10 seconds: Fri Nov 7 12:48:48 1997
INFO: ( 1) oamPT cell found on Output Port: CTL, VP 0, VC 34
INFO: ( 2) oamPT cell found on Output Port: CTL, VP 0, VC 34
Output
0
5
1CTL
0 34
0 14
1CTL
0 33
0 15
1CTL
0 32
0 16
1CTL
0 80
This gives the count of OAM Payload Type cells received which causing
This gives the count of all OAM Payload Type cells received and
0
5 1CTL 0 34'.
uni30
0
spans
spans
uni30
Advertisement
