Assembly And Mounting; Detection Zone; Figure 8: Detection Zone Simulation For A Downward Tilt Angle Of 10; Figure 9: Detection Zone Simulation For A Downward Tilt Angle Of 0 - icoms TMA-296 User Manual

2 A
SSEMBLY AND MOUNTING
1. Fix the radar on the bracket:
2. Set the appropriate parameter values
3. Place the radar on the pole pointing towards the approaching or receding vehicles
4. Firmly tighten the screws
3 D
ETECTION ZONE
Figure 8: detection zone simulation for a downward tilt angle of 10°
Figure 9: detection zone simulation for a downward tilt angle of 0°
18