Use Cases - Remarks; Detecting Bicycles; Detect Vehicles At 150 M; Technical Features - icoms TMA-296 User Manual

Table of Contents

Advertisement

1

DETECTING BICYCLES

-
Normal sensitivity: bicycles are detected at +/- 20 m, regardless of the programmed maximum range.
-
Low sensitivity: bikes are detected at +/- 12 m. We recommend setting the detection distance to 20 or 40
m.
-
Tilt the radar to reduce the dead zone (point the radar towards the centre of the desired detection area,
regardless of the maximum detection distance which can remain at 150 m with normal sensitivity)
2

DETECT VEHICLES AT 150 M

-
Point at 150 m (inclination close to horizontal)
-
Normal sensitivity
-
It is possible that the radar detects highly reflective objects (excavator, snow plough...) at more than 250
m during a very short period of time. Setting the sensitivity to the "low" position will avoid this, but the
overall detection distance will be slightly reduced for all objects.
Environmental
protection
Power
Consumption
User outputs
Temperature range
Dimensions
Weight (excl. cable and
mounting support)
Connector
Icoms Detections warrants its hardware products to be free from defects in workmanship and materials, under
normal use and service, for a period of two (2) years from the date of dispatch from Icoms Detections premises,
except for the batteries for which a warranty period of six (6) months applies.
If a product does not operate as warranted during the applicable warranty period, Icoms Detections shall, at its
option, either repair the defective unit, or deliver an equivalent product or part to replace the defective item. All
products that are replaced become property of Icoms Detections.
The defective product must be returned to Icoms Detections within the applicable warranty period. The defective
product must be shipped DDP (delivered duty paid) back to Icoms Detections, wrapped in the original or similar

USE CASES - REMARKS

TECHNICAL FEATURES

TMA-296-LV
10-30 V AC, 50-60 Hz
12V-60 V DC
@12 V DC : < 1,2 W
Inverted relay contacts – Resistive load:
o Default: 30 V AC 0,3 A – 60 V DC 0,3 A
o 250 V relay option: 250 V AC – 30 V DC – 0.3 A
2 LEDs on front face
RS-232
L 68 x H 99 x D 119 mm
320 gr

WARRANTY

TMA-296-MV
IP 65
15-54 V AC, 50-60 Hz
21-75 V DC
@24 V DC : < 1,2 W
From -40° C to +60° C
L 68 x H 99 x D 205 mm
510 gr
Weipu
TMA-296-HV
100V –240 V AC, 50-60 Hz
@230 V AC : < 2 W
L 68 x H 99 mm x D 212 mm
563 gr
19

Advertisement

Table of Contents
loading

Table of Contents