Idle Timeout; Lcd Manager Lock; Unit Name; Unit Ip Address - Bay Networks Marlin Reference Manual

IDLE After this time (in seconds), if there has been no input from
TIMEOUT the manager terminal, the manager session will be closed.
LCD If the LCD manager is locked, it is impossible to change the
MANAGER IP address, Name, Date/Time or make ISDN calls from the
LOCK front panel. Options: lock ENABLED, lock DISABLED.
UNIT NAME An alphanumeric name given to the unit. The name will
appear on most user and manager screens and is used for
easy referencing of units in the network. It should be
unique among the Nautica series Bridges that may be
connected.
UNIT IP The standard TCP/IP interface address of the unit. It is used
ADDRESS as the default for IP Routing to access the local management
system (Telnet and SNMP) for the unit over the network.
ETHERNET This is the unit's unique base Ethernet address, which is
ADDRESS configured into the unit hardware at the time of manufacture
and cannot be changed manually.

NODE ID.

Applies only to the C-Gate DCX
DEF. ISDN When making ISDN calls, this controls the default handling
ALERT of the front panel alert LED and audible alert. Used when
making ISDN calls where there is no other specific alert
control parameter, e.g. when initiating a manual ISDN call.
Options: DISABLED, ENABLED and BEEP.
ENABLED causes the front panel alert lamp to flash when
an ISDN call is attempted. BEEP causes the alert lamp to
flash and the unit to beep every time the ISDN channel
status is displayed on the front panel (as part of the port
status cycle).
RECV. ISDN When receiving ISDN calls, this controls the handling of the
ALERT front panel alert LED and audible alert (see Default ISDN
Alert above). Options: DISABLED, ENABLED and BEEP.
R
EFERENCE
gateway product.
5-11