Electrolux DMGL8372UO User Manual page 18

18 www.electrolux.com
Remove the object or clean the
control panel.
• the appliance gets too hot (e.g. when
a saucepan boils dry). Let the cooking
zone cool down before you use the
hob again.
• you do not deactivate a cooking zone
or change the heat setting. After some
time, the hob deactivates.
The relation between the heat setting /
fan speed setting and the time after
which the appliance deactivates:
Heat setting
1 - 2
3 - 4
5
6 - 9
Fan speed setting The hood deacti‐
1 - 3
7.2 PowerBoost
This function makes more power
available to the induction cooking zones.
The function can be activated for the
induction cooking zone only for a limited
period of time. After this time the
induction cooking zone automatically
sets back to the highest heat setting.
Refer to "Technical data"
chapter.
To activate the function for a cooking
zone: touch
To deactivate the function: change the
heat setting.
7.3 Pause
This function sets all cooking zones that
operate to the lowest heat setting. The
speed of the hood fan decreases to 1.
The hob deacti‐
vates after
6 hours
5 hours
4 hours
1.5 hours
vates after
10 hours
10 hours
10 minutes
.
When you activate the function while the
hood operates in the automatic mode,
the speed of the hood fan will not be
reduced.
When the function operates,
can be used. All other symbols on the
control panels are locked.
The function does not stop the timer
functions.
1. To activate the function: press
The heat setting is lowered to 1. The
speed of the hood fan decreases to 1.
2. To deactivate the function: press
.
The previous heat setting / fan speed
setting comes on.
7.4 Lock
You can lock the control panel while the
hob operates. It prevents an accidental
change of the heat setting / hood speed
setting.
Set the heat setting / hood speed setting
first.
To activate the function: press
To deactivate the function: press
again.
The function deactivates as
you deactivate the hob.
7.5 Child Safety Device
This function prevents an accidental
operation of the hob and the hood.
To activate the function: press
not set any heat setting / hood setting.
Press and hold for 3 seconds, until
the indicator above the symbol appears.
Deactivate the hob with
The function stays active
when you deactivate the
hob. The indicator above
is on.
To deactivate the function: press
Do not set any heat setting / hood
setting. Press and hold
and
.
.
. Do
.
.
for 3 seconds,