Wall Data (Rumba For Internet 1.0) - Bay Networks FastLink II User Manual

Wall Data (Rumba for Internet 1.0)

Product
Company
Address
Telephone
Technical Support Telephone
Installation Directions
Wall Data (Rumba for Internet 1.0)
To configure RUMBA do the following:
1
2
3
Run the RUMBA installation, and follow the standard installation instructions.
When prompted for your adapter driver enter the name of the FastLink II ODI driver using the
whole path as in the following line:
C:\FLINK\FLODI.COM
NOTE: Make sure you provide the full path name, or the installation will not work properly.
Configure your stack based on whether you want a static or dynamic IP address (see instructions
below).
102
Rumba for Internet 1.0
Wall Data
11332 N.E. 122nd Way
Kirkland, WA 98034
+1 800 927 8622
+1 800 927 8622