Definitive Technology DYMENSION DM10 User Manual page 15

Surround and height speakers
You can use the DM95 speakers as surround or height speakers. Review the Quick
Start Guide that came with the product for installation instructions. See below for
additional placement advice, depending on your setup.
For more information about using and positioning height-channel speakers for Dolby
Atmos, visit https://www.dolby.com/.
Follow these general best practices when using DM95s as surround speakers:
• Position the speakers on side walls, slightly behind and above the listening area.
• Position the speakers so that the tweeters point toward the listening area.
• If you install a second pair of DM95 speakers, mount them where they are best
able to face the listening area.
Note: Two DM95 speakers can be used for the surround channels in a 5.1 setup or
four can be used as surround and surround back channels in a 7.1 system.
Follow these general best practices when using DM95s as height-channel
speakers:
• Position the speakers so that the tweeters point toward the listening area.
• If you are using two DM95 speakers, you can mount the speakers above the
left-front and right-front speakers or to the sides (as seen in the diagram above),
depending on the room and your preferences. For detailed information and place-
ment suggestions with two or more height-channel speakers,
visit https://www.dolby.com/.
As with the tower and center speaker placement, your final surround height speaker
placement will depend on the environment and personal listening preferences.
15