Definitive Technology
Specifications
Di 5.5BPS
Grille Length
13-5/8" (34.6 cm)
Grille Width
7-3/4" (19.74 cm)
Cutout Width
6-13/16" (17.4 cm)
Cutout Length
12-5/8" (32.2 cm)
Total Depth *
3-7/8" (9.7 cm)
Mounting Depth In-Wall **
3-3/8" (8.42 cm)
Woofer
2 @ 5-1/4" (13.3 cm)
Tweeter
2 @ 1" (25 mm)
Product Weight
8.4 lb. (3.76 kg)
Frequency Response
28 Hz – 30 kHz
Sensitivity
89 dB
Impedance
Compatible with 4 – 8 Ohm outputs.
Recommended Amp Power
10 – 225 Watts Per Channel
* From back of mounting flange to deepest part of product
** Total depth when product installed in 1/2" (12.7 mm) thick material
Di 5.5BPS
Thank You
Thank you for choosing the Definitive Technology Disappearing In-Wall loud
speaker. The Di Series products offer extraordinary sound quality from speakers that
are barely visible when installed in a wall or ceiling. Our engineers spent many
years developing this product. In order to ensure that you experience the finest per
formance possible, we encourage you to take a moment to fully read this owner's
manual and familiarize yourself with the proper installation and set-up procedures
for your Di 5.5BPS speaker.
Unpacking Your Di 5.5BPS Speakers
Please Inspect For Shipping Damage
Each loudspeaker leaves our plant in perfect condition. Any visible or concealed
damage most likely occurred in handling after it left our plant and should be reported
at once to your Definitive dealer or the delivery company that delivered your loud-
speaker. Please unpack your system carefully. Save all cartons and packing materials
in case you move or need to ship your system. Record the serial number found on
the back of the speakers, and on the carton, in this manual and save it for future
reference should your speaker need service. For your best protection, register your
Di 5.5BPS speakers on-line at http://registration.definitivetech.com.
OWNER'S MANUAL
Need help?
Do you have a question about the DI 5.5BPS and is the answer not in the manual?
Questions and answers