Page 2
Thank you for choosing the Definitive Technology Demand Series tower speakers. The Definitive Technology Demand Series high-performance tower speakers deliver full-range, room-filling sound and precise imaging in a modern, elegant styling. The Demand Series offers the most cutting-edge audio technologies, including a Balanced Double Surround System (BDSS) high...
Safety Instructions SAFETY PRECAUTIONS IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. CAUTION 2. Keep these instructions. RISK OF ELECTRIC SHOCK DO NOT OPEN 3. Heed all warnings. 4. Follow all instructions. CAUTION: 5. Do not use this apparatus near water. TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
Page 5
NOTES ON USE A NOTE ABOUT RECYCLING: WARNINGS This product’s packaging materials are recyclable and can ∙ Avoid high temperatures. be reused. Please dispose of any materials in accordance with the local recycling regulations. Allow for sufficient heat dispersion when installed in a rack. When discarding the unit, comply with local rules or ∙...
Page 6
Register here: http://www.definitivetechnology.com/product-registration Note: the data we gather during online registration is never sold or distributed to third parties. * Serial number can be found at the back of the manual STAY VIGILANT ON ALL THINGS DEFINITIVE TECHNOLOGY @DefinitiveTech @DefinitiveTech...
Any visible or concealed damage most likely occurred in handling after it left our factory. If you discover any shipping damage, please report this to your Definitive Technology dealer or the company that delivered your loudspeakers.
Positioning the Speakers in Your Room Your Demand Series speakers are very flexible in terms of positioning, however each pair of speakers is designed with dedicated left and right speakers. Position the pair so that the tweeters are on the outside, as pictured here.
(Demand D5c) and surround loudspeakers (Demand D7/9/11), any of which will blend with your Demand Series front stage. Note: When using Demand Series as rear speakers position the speakers so that the tweeters are on the outside, closest to the outside walls. EN-8...
Adding an External Subwoofer to your Demand Series Towers Although the Demand Series delivers superb low frequency response, some listeners go for the ultimate performance and add an additional powered subwoofer to their system. If you choose to do so, we strongly suggest using the Supercube8000 (https://www.definitivetechnology.com/products/supercube-8000) in order to achieve the highest...
Connecting Your Loudspeakers STRIP 1/4" (6MM) WIRE 1. IDENTIFY MARKINGS ON WIRE AND ASSIGN +/– 2. APPLY BANANA PLUGS OR SPADES AT THIS POINT IF APPLICABLE Receiver/Amplifier ENSURE PROPER POLARITY BETWEEN THE AMPLIFIER 1. UNSCREW A SET OF BINDING POSTS AND INSERT AND SPEAKER BY CONNECTING + TO + AND - TO - THE BARE WIRE INTO THE CENTER HOLE TERMINALS...
Bi-Wiring & Bi-Amping If you decide to bi-wire or bi-amp, you must remove the flat metal jumpers between terminal posts. Failure to do this could result in damage to your amplifier and loudspeakers. Bi-wiring, or using separate speaker wire connections for high and low frequency sections.
Technical Assistance It is our pleasure to offer assistance if you have any questions regarding your Demand Series Towers or its setup. Please contact your nearest Definitive Technology dealer or call us directly at (800) 228-7148 (US & Canada), 01 363-7148 (all other countries) or e-mail info@definitivetech.com.
Troubleshooting If you experience any difficulties with your Demand Series speakers, try the suggestions below. If you still have problems, contact your Definitive Technology Authorized Dealer for assistance. 1. Audible distortion when the speakers are playing at loud levels is caused by turning up your receiver or amplifier louder than the receiver or the speakers are capable of playing.
This warranty does not cover labor costs or damage to the Product caused by installation or removal of the Product. Definitive Technology makes no warranty with respect to its products purchased from dealers or outlets other than Definitive Technology Authorized Dealer.
Page 16
2) The product is damaged due to accident, fire, flood, unreasonable use, misuse, abuse, customer applied cleaners, failure to observe manufacturers warnings, neglect or related events. 3) Repair or modification of the Product has not been made or authorized by Definitive Technology. 4) The product has been improperly installed or used.
Need help?
Do you have a question about the DEMAND Series and is the answer not in the manual?
Questions and answers