Page 2
DEFINITIVE TECHNOLOGY WHAT OBSESSION SOUNDS LIKE ™ Thank you for choosing the Definitive Technology Demand Series bookshelf speakers. The Demand Series offers the most cutting-edge audio technologies, including Balanced Double Surround System (BDSS) high output mid-bass drivers, a Linear Response Waveguide™...
SAFETY PRECAUTIONS 7. HEAT—Never locate the device near heat sources such as radiators, floor registers, stoves or other heat-generating devices. 8. CLEANING—The device should be cleaned in accordance with manufacturer’s instructions. We recommend using a lint roller or CAUTION! To reduce the risk of electric shock and fire, do not remove household duster for the grille cloth—and a clean, dry microfiber the cover or back plate of this device.
Page 5
(800) 228-7148 (US & Canada), 01 (410) 363-7148 (all other countries) Note: the data we gather during online registration is never sold or distributed to third parties. *Serial number can be found at the back of the manual STAY VIGILANT ON ALL THINGS DEFINITIVE TECHNOLOGY @DefinitiveTec @DefinitiveTech...
It is important to save this booklet, as it contains the serial number for your product. You can also find the serial number on on rear of the Demand Series speaker on input cup. Each loudspeaker leaves our factory in perfect condition.
Positioning the Speakers in Your Room Your Demand Series speakers are very flexible in terms of positioning. However, you must pay full attention to their placement—each model in the series consists of dedicated L/R speakers and must be set up that way to accurately enjoy them.
Connecting Your Loudspeakers STRIP 1/4" (6MM) WIRE 1. IDENTIFY MARKINGS ON WIRE AND ASSIGN +/– 2. APPLY BANANA PLUGS OR SPADES AT THIS POINT IF APPLICABLE + – + – + – 1. UNSCREW A SET OF BINDING POST ENSURE THAT THE SPEAKER IS ALWAYS AND CONNECT WIRE CONNECTED TO THE RECEIVER OR AMPLIFIER + TO + AND –...
Page 9
Bi-Wiring & Bi-Amping (D11 and D9 only) If you decide to bi-wire or bi-amp, you must remove the flat metal jumpers between terminal posts. Failure to do this could result in damage to your amplifier and loudspeakers. Bi-wiring, or using separate speaker wire connections for high and low frequency sections.
Technical Assistance It is our pleasure to offer assistance if you have any questions regarding your Demand Series speakers or their setup. Please contact your nearest Definitive Technology dealer or call us directly at (800) 228-7148 (US & Canada), 01 (410) 363-7148 (all other countries) or e-mail info@definitivetech.com.
SPECIFICATIONS DIMENSIONS 9.75" (24.76cm) H x 5.5" 11.72" (29.77cm) H x 13" (33.02cm) H x 7.25" (13.97cm) W x 8.75" 6.5" (16.61cm) W x 12" (18.42cm) W x 12.5" (22.23cm) D (30.48cm) D (31.75cm) D TWEETER 1" Aluminum Dome 1" Aluminum Dome 1"...
Troubleshooting If you experience any difficulties with your Demand Series speakers, try the suggestions below. If you still have problems, contact your Definitive Technology Authorized Dealer for assistance. 1. Audible distortion when the speakers are playing at loud levels is caused by turning up your receiver or amplifier louder than the receiver or the speakers are capable of playing.
This warranty does not cover labor costs or damage to the Product caused by installation or removal of the Product. Definitive Technology makes no warranty with respect to its products purchased from dealers or outlets other than Definitive Technology Authorized Dealer.
Page 14
Definitive Technology 1 Viper Way Vista, CA 92081 (800) 228-7148 www.definitivetechnology.com HBP3907A...
Need help?
Do you have a question about the DEMAND SERIES and is the answer not in the manual?
Questions and answers