Assembly - Westinghouse ePX3100V User Manual

ASSEMBLY

WARNING
washer to a power supply until it is fully assembled.
To avoid accidental starting and possible serious
injury, only connect a power supply when the
pressure washer is ready for use.
REMOVING CARTON CONTENTS
WARNING
Do not attempt to operate this product if any items
in the INCLUDED LIST are already assembled when
you remove the carton contents. These items are
not assembled by the manufacturer and should
require customer assembly. Using an improperly
assembled product can be hazardous and could
result in serious personal injury.
l Carefully cut down the sides of the packaging and
remove the carton contents.
l Inspect the carton contents. Verify that all the items in
the INCLUDED LIST are present and undamaged.
l Recycle or dispose of the packaging materials properly.
INCLUDED LIST
See Figure 3.
Pressure Washer, Spray Gun, Lance, Nozzles (15°
and 25°), High Pressue Hose, Foam Cannon, Turbo
Nozzle, Quick Start Guide, User Manual
If any parts are missing, contact our service team
at service@wpowereq.com or call 1-855-944-3571.
CONNECTING THE LANCE TO THE
SPRAY GUN
See Figure 4.
l Push the lance into the spray gun and turn clockwise to
tighten. Do not overtighten.
l Gently pull on the lance to be certain it is secured.
CONNECTING THE HIGH PRESSURE
HOSE TO THE SPRAY GUN
See Figure 5.
l Pull the collar on the high pressure hose back and push
the hose fitting firmly into the spray gun.
l Screw the collar onto the spray gun and tighten securely.
NOTE: Be careful not to damage the threads on the
spray gun doing so could cause the gun to leak during
use.
l Gently pull on the hose to be certain it is secured.
10 | English
Do not connect the pressure
This product requires assembly.
FIG. 3
B
A
A - High Pressure Hose
B - Spray Gun
C - Lance
D - Nozzles
E - Foam Cannon
F - Turbo Nozzle
FIG. 4
B
A - Spray Gun
B - Lance
FIG. 5
A
C
A - Spray Gun
B - High Pressure Hose
C - Collar
E
C
D
F
A
B