Electrical Connections - Abloy DB001 Installation Manual

ELECTRICAL CONNECTIONS

- Electrical connections should be made by a qualified electrician.
- The power plug must have an easy access.
- If a permanent connection is made unit must be equipped with an external
switch providing all pole disconnection.
- Keep the mains disconnected during installation.
Note! It is important that the high and low voltage cables are well
separated and fixed.
The high voltage cables must be routed and fixed on one side of the
drive unit by using the enclosed cable holders and the low voltage
cables must be routed on the opposite side using the same type of
cable holders.
F1 = 250 mAT
N L
230VAC 3 x 1,5 mm
F2 = 6.3ATH
2
15