Direct Bosch Camera Integration Via Atsl - Bosch LHN-UC15L-SIP User Manual

LHN‑UC15L‑SIP | LHN‑UC15W‑SIP | AMN‑P15‑SIP
6

Direct Bosch camera integration via ATSL

Using the camera's Alarm Task Scripting Language (ATSL) you can create a direct integration
between a Bosch camera and an IP Horn loudspeaker or IP amplifier module. The VGPI of the
IP Horn loudspeaker/Amplifier module controls the action, often a message playback, starting
or stopping it using this scripting.
To trigger an action on the IP Horn loudspeaker or the IP amplifier module, the scripting can
leverage the Alarm output and/or the VCA task alarms of the camera.
* Alarm Task Script Language
Figure 6.1: Direct camera integration principle
To link a camera with the IP Horn loudspeaker/IP Amplifier module, the following steps are
necessary:
At the IP Horn loudspeaker/IP Amplifier module:
–
–
NOTE: It is a good practice to enable the Trigger starts but does not stop the action check
box. This ensures the message plays entirely. For more information, see Trigger settings, page
32 .
At the camera:
–
Notice!
i
The username and password for both the Alarm Task Editor Script (camera) and the API user
account (IP Horn loudspeaker/IP Amplifier module) must match.
Bosch Security Systems B.V.
Camera detection
with
Built-in Intelligent
Video Analytics
(IVA)
Create an API account or use an existing one.
Create a Rule or use an existing one with VGPI trigger type to start an action, such as an
activation of a message.
Add a script at the Alarm Task Editor.
Direct Bosch camera integration via ATSL | en
VCA triggers
Horn loudspeaker
directly via IP ATSL*
integration
User manual
Play
pre-recorded
message
2023.02 | V01 | F.01U.389.835
41