Table of Contents
Advertisement
24
en | Installation
5.2.3
Power outputs
The output connectors are 2 Euroblock type for 2‑channels per connector. This allows an easy
pre‑wiring of the cables outside the rack and a fast - one connection for multiple channels at
once, without the danger of wiring errors.
Warning!
It is not allowed to interconnect terminals of different channels!
!
Caution!
For compliance to UL 62368‑1 and CAN/CSA C22.2 No. 62368‑1 all loudspeaker wiring must
!
be Class 2 wiring (CL2); this requirement does not apply for compliance to EN/IEC 62368‑1.
Caution!
Amplifier outputs may carry output voltages up to 100 V
!
wiring may result in an unpleasant sensation. The external wiring of these terminals requires
installation by an instructed person.
LoZ 4 Ω / 8 Ω application
CHANNEL 1
HiZ 70 V / 100 V application (Example channel 1)
Refer to
–
2023-01 | V02 | F.01U.402.247
OUTPUTS
CH 1
+ -
+ -
+
-
+
-
Indicators, controls and settings, page 16
CH 2
CHANNEL 3
CHANNEL 2
+
-
+
-
Installation manual
. Touching uninsulated terminals or
RMS
OUTPUTS
CH 3
+ -
+ -
+
-
OUTPUTS
CH 1
+ -
+
-
Bosch Security Systems B.V.
Power amplifier
CH 4
CHANNEL 4
+
-
CH 2
+ -
Advertisement
Table of Contents
