Advertisement
Maine Installation Guide (with underframe) - vJUN17
OUTSIDE OF
SHOWER
Alternatively, if you have a back-to-back handle, fit this to the door as shown,
14
ensuring the black plastic washers are located in the holes on both sides of the
glass.
Tighten the grub screws on the inside handle to secure.
The Majestic Shower Company Limited
17 Flitch Industrial Estate, Chelmsford Road, Dunmow, CM6 1XJ
Grub screw
INSIDE OF
SHOWER
Plastic washer
Bias
adjustment
screws
Close the door carefully and check that the seals close on to the walls correctly.
15
If necessary, the door can be adjusted on its hinges.
Adjust the bias on the hinges using the 2 small grub screws on the inside and
outside of the hinge. For an outward opening door, the two grub screws on the
outside of each hinge should be undone until their heads are flush with the hinge.
The grub screws on the inside of the hinge can then be tightened, pulling the door
in to the seal.
Reverse this process for inward opening doors.
Telephone +44 (0) 8448 001 500
Facsimile +44 (0) 1279 635 074 info@majesticshowers.com www.majesticshowers.com
9
Advertisement
